Product Description

       Single Acting Telescopic Cylinder     


The new Series SAT represents a substantial design upgrade to the previous Series SAT cylinder line. Custom SAT cylinders are available in a large variety of styles and configurations to accommodate even the most rigorous and demanding mobile equipment.

Additionally, the new SAT design features a changeable base bearing and overall lighter weight than the previous model. Extensive field testing involving 9 cylinder models have taken place in large OEMs, Internal testing with 3 different models run at 16 hours per day, 15,000 pound loads and 33,000 cycles have shown no failures.




1026 Steel, A36 Steel


13.8 Mpa


Various Operating Fluids


Various options availabe based on application requirements


Up to 17" inch


up to 500 inch


Up to 16" inch


-40 DEG TO 275 DEG F °F

Every  single acting telescopic cylinder is individually tested before leaving our plant to assure proper performance and leak-free operation. All  cylinder products carry  one year warranty.

• Truck
• Refuse
• Mining
• Material Handling
• Forestry
• Construction

Features and Benefits:
• Snap on glass filled bearings that absorb contaminants without damaging cylinder walls.
• Nylon tipped set screws that conform to packing nut threads to decrease the probability of packing nuts backing off.
• 18-month warranty.

• Dump Trucks and Trailers
• Mining Vehicles
• Material Handling Vehicles
• Construction Vehicles

    Single Acting Telescopic Hydraulic Cylinders provide extremely long cycle life and are field-repairable.Our telescopic cylinders are 2,000 CHINAMFG rated and support application specific requirements (stroke lengths, closed lengths, and mountings).

    Learn more about GD Single Acting Hydraulic Telescopic Cylinder operating pressure and design features under Product Support.
    Please kindly check our Seal kits .


    HangZhou GD Machinery CO.,LTD.


    tie rod hydraulic cylinder, welded hydraulic cylinder, telescopic cylinders cylinder, 

     flange type hydraulic cylinder,  hydraulic cylinder with valve function,

    hydraulic power unit,  Hydraulic manifold block,  pneumatic fitting,


    Tube - Cold Drawn Precision seamless Tubing 
    End Caps - Steel, threaded fixed; 
    Wear Ring - Nylon Backup Washer 
    Rod Seals - Polyurethane U-Cap 
    Rod - Chromed, ground & polished piston rod

    Mounts - Trunnion with angular Swivels 
    Rod Wiper - Polyurethane


    Agriculture, Concrete & Asphalt, 

    Cranes, Fire & Rescue,

     Forestry & Logging,Mining & Rock Crushing,

    Oil & Gas,

    Snow & Ice Control,Waste Management 

    Material Recycling Industry ,

    Engineering Equipment

    Special Vehicle


    1.High quality with a reasonable price


    3.Customized specification are accepted




    HangZhou ,China


    According to the specific request


    According to the product


    metal case;plywood case;carton or as requirement

    Delivery time

    30days CHINAMFG receipt of 30% deposit; or CHINAMFG receipt of relevant L/C;


    • Please review our production processes:


    We use metal case,plywood case /carton or as Customer's requirements

    Hydraulic cylinders can be built according to your drawings or technical requirement.
    Sample order are acceptable

    Please kindly contact:





    Certification: RoHS, ISO9001
    Pressure: High Pressure
    Work Temperature: High Temperature
    US$ 300/Piece
    1 Piece(Min.Order)


    Order Sample



    .shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

    Shipping Cost:

    Estimated freight per unit.

    about shipping cost and estimated delivery time.
    Payment Method:


    Initial Payment

    Full Payment
    Currency: US$
    Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

    hydraulic cylinder

    Can hydraulic cylinders be adapted for specialized applications like material handling?

    Yes, hydraulic cylinders can be effectively adapted for specialized applications such as material handling. The versatility, power, and precise control offered by hydraulic cylinders make them well-suited for a wide range of material handling tasks. Hydraulic systems, including cylinders, are commonly used in industrial settings to lift, position, push, pull, and manipulate various types of materials. Here's a detailed explanation of how hydraulic cylinders can be adapted for specialized material handling applications:

    1. Lifting and Lowering:

    - Hydraulic cylinders are commonly used for lifting and lowering heavy loads in material handling applications. By utilizing the force generated by hydraulic pressure, cylinders can provide the necessary power to lift and hold loads at different elevations. The precise control offered by hydraulic systems allows for accurate positioning of materials, ensuring efficient and safe lifting operations.

    2. Pushing and Pulling:

    - Hydraulic cylinders are capable of generating substantial pushing and pulling forces, making them ideal for applications that involve moving or manipulating materials. They can be used to push or pull heavy objects, control the movement of conveyors or rollers, or engage mechanisms for material transfer. The ability to exert high forces with precise control enables hydraulic cylinders to efficiently handle a variety of material handling tasks.

    3. Tilting and Rotating:

    - Hydraulic cylinders can be adapted to provide tilting and rotating functions in material handling equipment. By integrating cylinders into the design, equipment such as forklifts, cranes, or material handling arms can tilt or rotate to facilitate material placement or maneuvering. Hydraulic cylinders offer the required force and control to achieve smooth and controlled tilting or rotating motions, enhancing operational efficiency in material handling processes.

    4. Gripping and Clamping:

    - Hydraulic cylinders can be utilized to provide gripping and clamping functions for secure material handling. By incorporating specialized gripping or clamping mechanisms with hydraulic actuation, materials of various shapes and sizes can be securely held or clamped during transportation or processing. Hydraulic cylinders enable precise and adjustable gripping or clamping forces, ensuring the safe and reliable handling of materials.

    5. Material Compaction and Forming:

    - Hydraulic cylinders can be adapted for material compaction and forming applications. For example, in the production of bricks, hydraulic cylinders are used to apply high pressure and force to compact the raw materials into desired shapes. Similarly, in metal forming processes, hydraulic cylinders are employed to exert force on metal sheets or components, enabling precise shaping and forming operations.

    6. Conveyor and Sorting Systems:

    - Hydraulic cylinders can be integrated into conveyor and sorting systems to facilitate material movement and sorting. By incorporating hydraulic actuators, conveyor belts or sorting mechanisms can be efficiently controlled for optimal material flow and distribution. Hydraulic cylinders provide the necessary force and control to handle varying load capacities and adjust the speed and position of material transfer, improving the overall efficiency of handling and sorting operations.

    7. Customized Designs:

    - Hydraulic cylinders can be customized and adapted to meet specific requirements of specialized material handling applications. Engineers can design cylinders with unique dimensions, stroke lengths, mounting options, and sealing arrangements to fit into equipment or systems with specific space limitations or operating conditions. Customized hydraulic cylinders ensure optimal performance and compatibility for specialized material handling tasks.

    In summary, hydraulic cylinders can be effectively adapted for specialized material handling applications, offering the necessary force, control, and versatility required in various material handling tasks. Whether it involves lifting and lowering, pushing and pulling, tilting and rotating, gripping and clamping, material compaction and forming, or integration into conveyor and sorting systems, hydraulic cylinders provide reliable and efficient solutions. Their adaptability, precise control, and ability to handle heavy loads make hydraulic cylinders a valuable component in optimizing material handling processes across different industries.

    hydraulic cylinder

    Integration of Hydraulic Cylinders with Equipment Requiring Rapid and Dynamic Movements

    Hydraulic cylinders can indeed be integrated with equipment that requires rapid and dynamic movements. While hydraulic systems are generally known for their ability to provide high force and precise control, they can also be designed and optimized for applications that demand fast and dynamic motion. Let's explore how hydraulic cylinders can be integrated with such equipment:

    1. High-Speed Hydraulic Systems: Hydraulic cylinders can be part of high-speed hydraulic systems designed specifically for rapid and dynamic movements. These systems incorporate features such as high-flow valves, optimized hydraulic circuitry, and responsive control systems. By carefully engineering the system components and hydraulic parameters, it is possible to achieve the desired speed and responsiveness, enabling the equipment to perform rapid movements.
    2. Valve Control: The control of hydraulic cylinders plays a crucial role in achieving rapid and dynamic movements. Proportional or servo valves can be used to precisely control the flow of hydraulic fluid into and out of the cylinder. These valves offer fast response times and precise flow control, allowing for rapid acceleration and deceleration of the cylinder's piston. By adjusting the valve settings and optimizing the control algorithms, equipment can be designed to execute dynamic movements with high speed and accuracy.
    3. Optimized Cylinder Design: The design of hydraulic cylinders can be optimized to facilitate rapid and dynamic movements. Lightweight materials, such as aluminum alloys or composite materials, can be used to reduce the moving mass of the cylinder, enabling faster acceleration and deceleration. Additionally, the cylinder's internal components, such as the piston and seals, can be designed for low friction to minimize energy losses and enhance responsiveness. These design optimizations contribute to the overall speed and dynamic performance of the equipment.
    4. Accumulator Integration: Hydraulic accumulators can be integrated into the system to enhance the dynamic capabilities of hydraulic cylinders. Accumulators store pressurized hydraulic fluid, which can be rapidly released to supplement the flow from the pump during high-demand situations. This stored energy can provide an extra boost of power, allowing for faster and more dynamic movements. By strategically sizing and configuring the accumulator, the system can be optimized for the specific rapid and dynamic requirements of the equipment.
    5. System Feedback and Control: To achieve precise and dynamic movements, hydraulic systems can incorporate feedback sensors and advanced control algorithms. Position sensors, such as linear potentiometers or magnetostrictive sensors, provide real-time position feedback of the hydraulic cylinder. This information can be used in closed-loop control systems to maintain precise positioning and execute rapid movements. Advanced control algorithms can optimize the control signals sent to the valves, ensuring smooth and dynamic motion while minimizing overshooting or oscillations.

    In summary, hydraulic cylinders can be integrated with equipment that requires rapid and dynamic movements by utilizing high-speed hydraulic systems, employing responsive valve control, optimizing cylinder design, integrating accumulators, and incorporating feedback sensors and advanced control algorithms. These measures enable hydraulic systems to deliver the speed, responsiveness, and precision necessary for equipment operating in dynamic environments. By leveraging the capabilities of hydraulic cylinders, manufacturers can design and integrate systems that meet the requirements of applications demanding rapid and dynamic movements.

    hydraulic cylinder

    Which industries and machinery commonly use hydraulic cylinders for power transmission?

    Hydraulic cylinders are widely used in various industries and machinery for power transmission due to their ability to generate high force, precise control, and reliable operation. They play a crucial role in converting hydraulic energy into mechanical force and motion. Here are the detailed industries and machinery that commonly utilize hydraulic cylinders for power transmission:

    1. Construction and Heavy Equipment:

    - Hydraulic cylinders are extensively used in the construction industry for tasks involving heavy lifting, pushing, and positioning. They are employed in cranes, excavators, loaders, bulldozers, and other heavy equipment to lift and move heavy loads, operate attachments, and manipulate construction materials. Hydraulic cylinders provide the necessary force and control for tasks such as lifting and lowering buckets, extending and retracting booms, and tilting blades.

    2. Material Handling and Logistics:

    - In material handling and logistics applications, hydraulic cylinders are vital components for the movement and manipulation of goods. They are used in forklifts, stackers, palletizers, and conveyor systems to lift, lower, and position loads with precision. Hydraulic cylinders enable the efficient transfer of heavy objects, facilitate stacking and sorting operations, and contribute to the smooth operation of material handling equipment.

    3. Agriculture and Farming:

    - The agricultural industry relies on hydraulic cylinders for various tasks in farming equipment. Tractors, harvesters, sprayers, and loaders utilize hydraulic cylinders to perform functions such as lifting and lowering implements, adjusting the position of attachments, and steering operations. Hydraulic cylinders enable efficient and precise control in tasks like plowing, tilling, harvesting, and baling, enhancing productivity and convenience in agricultural operations.

    4. Mining and Extraction:

    - Hydraulic cylinders are extensively utilized in the mining and extraction industry for their ability to handle heavy loads and operate in challenging environments. They are employed in mining equipment such as dump trucks, loaders, and excavators for tasks like ore extraction, rock breaking, and material transport. Hydraulic cylinders provide the force required for excavating, loading, and dumping operations, contributing to the efficiency and productivity of mining operations.

    5. Manufacturing and Industrial Machinery:

    - Hydraulic cylinders are an integral part of various manufacturing and industrial machinery. They are utilized in presses, stamping machines, injection molding machines, and metal forming equipment to apply force for shaping, bending, and pressing operations. Hydraulic cylinders enable precise control over the force and speed required for manufacturing processes, ensuring accurate and consistent results.

    6. Automotive and Transportation:

    - Hydraulic cylinders are employed in the automotive and transportation industry for a range of applications. They are used in vehicle lifting systems, such as car lifts and hydraulic jacks, for maintenance and repairs. Hydraulic cylinders are also utilized in bus doors, truck tailgates, and cargo handling systems to provide controlled movement and positioning. Additionally, hydraulic suspension systems in trucks, buses, and trailers use hydraulic cylinders for load leveling and stability.

    7. Aerospace and Aviation:

    - The aerospace and aviation industry relies on hydraulic cylinders for various applications, including aircraft landing gear, wing flaps, and flight control systems. Hydraulic cylinders provide the necessary force and precise control for extending and retracting landing gear, adjusting wing surfaces, and actuating control surfaces. They contribute to the safe and efficient operation of aircraft, ensuring reliable performance during takeoff, landing, and flight maneuvers.

    8. Marine and Offshore:

    - Hydraulic cylinders are utilized in marine and offshore equipment for a wide range of tasks. They are found in ship and boat steering systems, hatch covers, cranes, winches, and anchor handling equipment. Hydraulic cylinders enable precise control and powerful force transmission in maritime applications, supporting navigation, cargo handling, and offshore operations.

    In summary, hydraulic cylinders are commonly used in industries such as construction, material handling, agriculture, mining, manufacturing, automotive, aerospace, marine, and more. They are integral components in machinery and equipment that require reliable power transmission, precise control, and the ability to handle heavy loads. The versatile nature of hydraulic cylinders allows them to be adapted to various applications, contributing to increased efficiency, productivity, and safety in numerous industries.

    China Best Sales Telescopic Hydraulic Cylinder & Single Acting Hydraulic Cylinderheavy Duty High Pressure Hydraulic Cylinder Dual Stage for Industrial Crane Excavator   with Good quality China Best Sales Telescopic Hydraulic Cylinder & Single Acting Hydraulic Cylinderheavy Duty High Pressure Hydraulic Cylinder Dual Stage for Industrial Crane Excavator   with Good quality
    editor by CX 2023-10-18