Product Description

Fostar's War CHINAMFG series
FSD-XXY  double column gantry lift machine
Quality assurance
Leading technology/accurate measurement/simple operation/full
Guidance

Commodity information
Product name: FSD-2140X double column gantry lift machine
Brand Name: Fostar CHINAMFG
Model: FSD-XXY
Net weight: 570KG, gross weight: 620KG
Floor space: Length 2870 x Width 500 × 610 high

Product structure

Double column lift

(Non seat tube type manual unlocking)

 

Lifting weight: 4000kg

Lifting height: 1900mm

Minimum height: 100mm

Total height: 2820mm

Total width: 3280mm

Width inside the column: 2790mm

Lifting time: 50s-60s

Motor power: 2.2kw

Power requirement: 380V/220V

1. The height of the column is 4.75mm thick steel plate, the column is not distorted, no deformation, high safety performance.
2. Adopt high quality cylinder, cylinder quality guarantee for 3 years, free replacement of the cylinder during the warranty period.
3. The transmission chain adopts a single 121 section 4×4 shield chain, quality assurance products.
4. The power unit adopts the international famous brand of pure copper core motor.
5. The safety lock will be automatically locked when rising to ensure the safety when rising.
6. There are beam connections between the 2 columns, with a limiting device, to ensure safe power off.

Product features:

Double column gantry lifting machine is a kind of relatively advanced automobile maintenance equipment, mainly used for the rapid repair and maintenance of various small cars under 4000 kg, replacing the shortcomings of the old gutter repair, with a small area, less investment, high efficiency advantages, is the ideal maintenance equipment for modern automobile repair industry.

Product advantage

1.Can be used for multi - station mobile automatic tracking system Four-wheel positioning survey

------------------------------------
2.Easy operation (With detailed instructions before delivery)
The measurement of four-wheel positioning is not affected by the levelness of lifting platform, and the accuracy of body tilting diagonally is not affected. All vehicle four-wheel positioning parameters can be measured only by pushing or rolling wheels. Lift operation is only a simple operation to control the positive and negative rotation and stop of the switching motor. 

------------------------------------

  1. Reliable quality, low failure rate

Structure adopts the chain drive instead of the original industry commonly used wire drive more safe and reliable.

------------------------------------
Two - column lift as the 4 - wheel positioning operation

1.Stop the car on the ground, install the rim fixture of the four-wheel positioning instrument on the wheel, release the brake and put it in N gear, double-click the computer four-wheel positioning program.

 

2.Turn on the power switch of the lift machine.

 

3.Test run the lift machine and adjust to the right position so as to get on the bus. When rising, press the "start" button on the motor, and hear the "click" sound during the rise indicating that the lift locks itself.

 

4.Park the car at the designated location as required.

 

5.Adjust the lift so that its 4 support pieces are in the right position of the car. At this time, pay attention to the length of the 4 support arms, and the 4 support pieces contact the body reliably. And as close as possible to the 4 wheels, and let it in the same plane, ensure that the body center of gravity in the first 2 NAI support point after the line after the 2 technical support point in the middle of the line, so that the lifting machine in the rise of the car stable without shaking, tilt R, when the car to take off any parts do not lose center of gravity.

 

6.Lock the lever arm tightening device in front of the vehicle and slowly and steadily rise the vehicle.

 

7.Open the operation surface of the four-wheel positioning computer: find the model point and enter the scrolling model interface. According to the prompt, rolling the wheel back and forth will detect the wheel data, then install the steering wheel lock, pull brake, install the brake fixing bracket, start lifting adjustment, if you do not do the kingpin test can jump directly to lift the lift to the position of adjustment, click finish button, adjust the vehicle, the data will be displayed in real time. Lift again according to the required height, refer to the standard data, adjust each positioning Angle after completion, click next. Go to data save or print.

 

8.Kingpin test is required as described above: after lifting the lift. The car was in the air on all 4 wheels and landed in the nearest safe spot.

 

9.All the measured results will be displayed automatically when the operation is completed according to the prompts (the direction lock should be released when testing the kingpin, and the seventh item above can be tested only after it is finished .

------------------------------------

Passed ISO quality system certification and export CE certification

------------------------------------

The appearance and color of the product are optional

 

Technical parameter

Height of column: 3660mm
Lifting weight (rated parameter) 4000KG
lift MAX 1750mm
Rise and fall time: rise 45-60S
Rise and fall time: fall 15-25S
Lifting arm rotation Angle 90°
Electric voltage: 2.2KW/220V/380V
Driving mode Electro-hydraulic
Machine weight 570KG

Standard Accessories

Universal packaging: Two packages
1. The iron frame is packed with 2 main columns and bottom plate couplings, equipped with steel wire and other accessories.
2. Carton packing an electric pump station assembly plus factory documents.
3. Package size: 550*4000*750mm a piece,300*350*700mm 1 piece

------------------------------------
Instructions for use
 

1.Introduction of structural products

The product consists of 2 main columns and the top beam to form the main engine, the attachment has 4 lifting arm assembly, according to the pump station output hydraulic transmission mechanism: the hydraulic lifting cylinder, through the wire pulley to lift or lower the 4 support arms. To lift the car for maintenance inspection.
 

2.The main purpose of the machine

Double column gantry lifting machine is a kind of relatively advanced automobile maintenance equipment, mainly used for the rapid repair and maintenance of various small cars under 4000 kg, replacing the shortcomings of the old gutter repair, with a small area, less investment, high efficiency advantages, is the ideal maintenance equipment for modern automobile repair industry.
 

3.Detection range

It is mainly used for quick repair and detection of various small cars under 4000 kg.
 

4.Main features

  Double column lifting machine is a kind of relatively advanced automobile maintenance equipment, mainly used for the rapid repair and maintenance of various small cars under 3500 kg. It replaces the shortcomings of the old gutter repair. It has the advantages of small area, less investment and high efficiency, and is the ideal maintenance equipment for modern automobile repair industry.
  1)The column adopts 4.75mm thick steel plate, no distortion, no deformation, high safety performance.
  2)Adopt high quality cylinder, cylinder quality guarantee for 3 years, free replacement of the cylinder during the warranty period.
  3)The transmission chain adopts a single 121 section 4×4 shield chain, quality assurance products.
  4)The power unit adopts the international famous brand of Deli pure copper core motor.
  5)The safety lock will be automatically locked when rising to ensure the safety when rising.
 

5.How the machine works?

The machine inputs the oil pressure through the hydraulic pump station to drive the piston movement of the hydraulic cylinder, drive the action of the wire transmission mechanism, and drive the car lifting arm in the equipment up and down.

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Video Technical Support, Online Support, Remote Su
Warranty: 1 Year
Type: Double Cylinder Hydraulic Lift
Customization:
Available

|

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

lift cylinder

How does a lift cylinder contribute to smooth and controlled lifting motion?

A lift cylinder plays a crucial role in ensuring smooth and controlled lifting motion in various applications. Here's an explanation of how a lift cylinder contributes to this:

1. Hydraulic Operation:

A lift cylinder typically operates using hydraulic power. Hydraulic systems utilize pressurized fluid to generate force and motion. The lift cylinder is connected to the hydraulic system, and when the hydraulic fluid is pressurized, it exerts force on the piston inside the cylinder. This force causes the cylinder to extend or retract, enabling the lifting motion. The hydraulic operation of the lift cylinder provides a smooth and consistent force, resulting in a controlled and precise lifting motion.

2. Synchronization:

In some applications, multiple lift cylinders are used together to achieve synchronized lifting. These cylinders work in tandem, ensuring that the lifting force is evenly distributed and that the load remains level throughout the lifting process. The synchronization of lift cylinders contributes to a smooth and balanced lifting motion, reducing the risk of tilting or instability.

3. Control Valves:

Lift cylinders are often equipped with control valves that allow operators to control the flow and pressure of the hydraulic fluid. By adjusting these control valves, operators can regulate the speed and force of the lifting motion. This provides precise control over the lifting process, allowing for smooth and controlled movements tailored to the specific requirements of the application.

4. Damping and Cushioning:

Some lift cylinders incorporate damping and cushioning mechanisms to further enhance the smoothness and control of the lifting motion. These mechanisms help absorb shocks and vibrations, preventing sudden jolts or jerky movements during the lifting process. Damping and cushioning features contribute to a more comfortable and controlled lifting experience, particularly when dealing with delicate or sensitive loads.

5. Load Capacities:

Lift cylinders are designed to handle specific load capacities based on their size, construction, and specifications. By selecting the appropriate lift cylinder for the intended load, operators can ensure that the lifting motion remains smooth and controlled. Overloading or underloading the lift cylinder can lead to instability or uneven lifting, affecting the overall smoothness and control of the motion.

In summary, a lift cylinder contributes to smooth and controlled lifting motion through its hydraulic operation, synchronization (if applicable), the use of control valves, damping and cushioning mechanisms, and appropriate load capacities. These factors work together to provide reliable and precise lifting, enhancing safety and efficiency in various applications.

lift cylinder

Can lift cylinders be used in hydraulic presses for material forming?

Yes, lift cylinders can be used in hydraulic presses for material forming. Hydraulic presses are widely employed in manufacturing processes that involve shaping, bending, or compressing materials such as metal, plastic, or rubber.

Lift cylinders, also known as hydraulic cylinders, play a crucial role in hydraulic presses by providing the force required for material forming. Here's how lift cylinders are utilized in this context:

  • Force Generation: Lift cylinders are responsible for generating the force necessary to exert pressure on the material being formed. They convert hydraulic energy into mechanical force, enabling the press to shape or mold the material according to the desired specifications.
  • Stroke Length: Lift cylinders have an adjustable stroke length, allowing them to accommodate different material forming requirements. By modifying the stroke length, the press can apply varying degrees of force and control to achieve the desired shape and dimensions of the formed material.
  • Control and Precision: Lift cylinders offer precise control over the force and movement in hydraulic presses. The hydraulic system controlling the cylinders allows for accurate adjustment and regulation of the pressure, speed, and timing of the forming process. This control ensures consistent and precise material forming results.
  • Die Mounting: Lift cylinders are employed in the mounting of dies or tooling within the hydraulic press. The cylinders provide the necessary lifting and lowering action to secure the dies in place and facilitate their proper alignment with the material being formed. This ensures accurate and repeatable forming operations.
  • Safety Features: Hydraulic presses incorporating lift cylinders often include safety features such as pressure relief valves, emergency stop controls, and overload protection. These features help safeguard operators and prevent damage to the press or the formed material.

The use of lift cylinders in hydraulic presses for material forming offers several advantages. They provide the high force capability required for effective shaping and forming of various materials. The adjustable stroke length and precise control allow for versatility and customization, accommodating different forming needs. The integration of safety features ensures safe operation and protects both the equipment and personnel.

In conclusion, lift cylinders are suitable for use in hydraulic presses for material forming. Their ability to generate force, adjust stroke length, and provide precise control makes them essential components in achieving accurate, efficient, and reliable material forming processes.

lift cylinder

How does a lift cylinder contribute to precise load positioning?

A lift cylinder plays a crucial role in achieving precise load positioning in various applications. Here's an explanation of how a lift cylinder contributes to precise load positioning:

1. Controlled Vertical Motion:

A lift cylinder provides controlled vertical motion, allowing for accurate and precise movement of the load. By adjusting the hydraulic fluid flow and pressure, the cylinder extends or retracts with the desired speed and smoothness. This controlled motion enables precise positioning of the load at the desired height or location.

2. Adjustable Stroke Length:

Lift cylinders often have an adjustable stroke length, which refers to the distance the piston can travel within the cylinder barrel. By customizing the stroke length according to the specific load positioning requirements, the cylinder can achieve the desired precision. This adjustability allows for fine-tuning the cylinder's movement to accurately position the load with precision.

3. Load Holding Capability:

Lift cylinders are designed to have load holding capability, meaning they can maintain the position of the load without drifting or unwanted movement. This is achieved through the use of seals, locking mechanisms, or pressure control valves that prevent the cylinder from extending or retracting unintentionally. The load holding capability ensures that once the load is positioned precisely, it remains stable and secure.

4. Sensing and Feedback Systems:

Advanced lift cylinder systems may incorporate sensing and feedback mechanisms to enhance load positioning precision. These systems use sensors to measure the position, force, or pressure within the cylinder and provide feedback to the control system. This real-time feedback allows for continuous adjustments and fine-tuning of the cylinder's movements, ensuring precise load positioning.

5. Integration with Control Systems:

Lift cylinders can be integrated with control systems that enable precise load positioning. Through electronic controls or programmable logic controllers (PLCs), the cylinder's movement can be precisely controlled and coordinated with other equipment or processes. This integration allows for synchronized movements and accurate load positioning in complex automation systems.

In summary, a lift cylinder contributes to precise load positioning through controlled vertical motion, adjustable stroke length, load holding capability, sensing and feedback systems, and integration with control systems. These features and capabilities enable lift cylinders to achieve the precise positioning required in various applications, ranging from material handling to industrial automation.

China OEM Fostar OEM 2 Post Car Hydraulic Lift Red Blue Cylinder Power Time Hydraulic Double   vacuum pump engine	China OEM Fostar OEM 2 Post Car Hydraulic Lift Red Blue Cylinder Power Time Hydraulic Double   vacuum pump engine
editor by CX 2023-12-16